Pressurized Solar Water Collector

Quote Online

Name is required and must be a string.
An email address is required.
Phone is required.
Country is required.
Message is required.

Heat-pipe solar collector

Collector Separates With The Storage Tank, The Collector Can Be Put On Mounting Flat Or Roof This Product Has Hail Resistance Water Is Rapidly Heated By The Heat Pipe No Water In The Tubes, So The Tubes Will Not Freeze In Winter It Can Still Operate In The Event Of Occasional Tube Breakages Can Be Connected With Existing System

    1. Detailed information

     Heat-pipe solar collector 

    Characteristics:
    1. All the pipeline is made of red copper and conducted by heat transfer medium liquid.With the heat pipe in the vacuum tube,so no water will flow in the vacuum tube
    2. The manifold uses aluminum alloy for exterior,red copper for interior,also with fashion design.
    3. Withstand high pressure when it is working
    4. It can be combined arbitrarily to meet the demand of large water consumption,and also could be combined with existing pipeline
    5. Each tube can work alone,so the solar colletcor can work even one tube is broken and easy to change if necessary
    
    KEY SPECIFICATION:
    Vacuum Tube: Vacuum Tube With Copper Heat Pipe
    Inner Tank: Stainless Steel 304-2B
    External Shell: Galvanized Steel/ Aluminum Alloy/ Stainless Steel
    Frame: Galvanized Steel/ Aluminum Alloy/ Stainless Steel.
    Insulating Layer: Polyurethane Foam
    Max Pressure: 1Mpa
    Operating Fluid Pressure: 0.6Mpa
    Max Stagnation Temperature: 210.3℃
    Water Flow Rate: 0.02kg/s per ㎡
    Hail resistance: 25mm
    Heat Pipe: Anti-freezing > -35 ℃
    FEATURE:
    Collector Separates With The Storage Tank, The Collector Can Be Put On Mounting Flat Or Roof
    This Product Has Hail Resistance
    Water Is Rapidly Heated By The Heat Pipe
    No Water In The Tubes, So The Tubes Will Not Freeze In Winter
    It Can Still Operate In The Event Of Occasional Tube Breakages
    Can Be Connected With Existing System
    
    Type Area(M2) Vacuum tube:
    Qty(pcs) Length/Width/Height(mm) GrossWeight (KG) 20GP/40GP/40HQ  Loading Qty(sets)
    DIYI-C01-10 1.280 10 2020*995*155 43 195/395/485
    DIYI-C01-15 1.939 15 2020*1410*155 62 120/245/291
    DIYI-C01-20 2.595 20 2020*1825*155 70 92/187/222
    DIYI-C01-25 3.251 25 2020*2240*155 87 80/163/193
    DIYI-C01-30 3.907 30 2020*2655*155 105 65/130/161
    Vacuum tube size: 58*1800mm
    
    Design Advantages
    Evacuated Tube Efficiency:
    The vacuum space in the evacuated tube greatly reduces heat loss. This greatly increases 
    the conversion efficiency at higher water temperatures or when the outside temperature is
    very cold.For a thorough understanding of evacuated tubes

    MetInfo enterprise content manager system | MetInfo CMS

     

    Evacuated Tube and Heat Pipe:
    The Apricus evacuated tube and heat pipe are assembled differently to any other product on the market.
    
    Rather than a centrally located heat pipe with heat transfer fins radiating out to the glass wall, the heat 
    
    pipe is positioned directly against the glass wall, where the sun is striking. The aluminium heat transfer 
    
    fins are tightly held against the top inner wall of the evacuated tube as well as the heat pipe with a set of 
    
    specially designed clips.  This is an important design feature as over time with the high temperature, 
    
    Aluminium will soften, and so the clips ensure long term tight contact, which is essentially for optimal performance.  

     MetInfo enterprise content manager system | MetInfo CMS

     MetInfo enterprise content manager system | MetInfo CMS

     

    Solar hot water system

    Copyright © 2015 Haining Mayca Solar Energy Technology Co.,Ltd.
    Professionally manufactures solar water heater,solar collector. All rights reserved.

    ');
    ');

    logo